VTR and DDR controllers | altuS - HT200 series

Single and dual compact VTR and DDR controllers. Introducing altuS, the new range of compact controllers.

Single and Dual VTR Control

The HT201 single machine controllers are stylish and cost effective. They have a small footprint console and are ideally suited for use in cluttered production areas. A custom designed heavy metal jog/shuttle wheel and transport keys with status LEDs provide smooth and accurate machine control.

  • Controls large range of VTRs and Disk systems

  • Single machine control.

  • Mark key to store a total of 6 cue location points

  • Access the stored points using dedicated buttons on the panel

  • Crash record mode

  • Play and Record lock - prevents accidental stopping of device

  • Internal beeper to alert warnings (off line, cassette out etc)

  • New software is distributed through the Hi Tech website, allowing convenient upgrades (using a PC).

 

All the features of the HT211 plus

  • Keyboard interface for the connection of a shot box or keyboard - future enhancement.

  • High brightness fluorescent display

  • Mark In and Mark Out keys to store a total of 100 in and 100 out cue location points

  • Programmable cueing modes (cue + stop, cue + play)

  • Display time duration between Mark in and Mark out points

  • Programmable jog, shuttle and variable sensitivity of the wheel, for operator preference and VTR type

HT212 – dual machine Compact VTR Controller. Hi Tech Systems is proud to announce the exciting new HT212 compact controller. Having a small footprint, this 2-machine controller for VTRs and Disk recorders is designed for busy production areas. The HT212 VTR and disk Controller, designed for speedy and convenient control of VTR and disk based systems. Controller features

  • Controls large range of VTRs and Disk systems

  • Keyboard interface for the connection of a shot box or keyboard - future enhancement

  • Mark In and Mark Out keys to store a total of 100 in and 100 out cue location points

  • Access the stored points using dedicated buttons on the panel

  • Programmable cueing modes (cue + stop, cue + play)

  • Simultaneous two machine control

  • Programmable jog, shuttle and variable sensitivity of the wheel, for operator preference and VTR type

  • Play and Record lock - prevents accidental stopping of device

  • Large high visibility vacuum fluorescent display for time code and data information

  • Internal beeper to alert warnings (off line, cassette out etc)

  • New software is distributed through the Hi Tech website, allowing convenient upgrades (using a PC). And Disk systems.

HT212e - This controller is designed for VTR control and simple edit functions over linear systems. The HT212e light weight design allows for hand held operations. Capable of controlling up to two machines, the HT212e can accomplish both assemble and insert. The control panel also provides a Jog/Shuttle dial for fast and accurate cueing

  • Two-machine editing

  • Assemble and insert mode

  • Eight -channel audio editing

  • A variety of edit functions such as IN and OUT POINT ENTRY

  • + and - TRIM •AUTO EDIT

  • PREVIEW/REVIEW

  • GO TO TC

  • ALL STOP

  • TC/CTL/VITC editing mode selectable

  • Speed offset recording.

  • Edit delay time setting.

  • VTR remote control function; PLAY, REWIND, FAST-FORWARD, REC, STOP

  • Picture search using the jog/shuttle dial for jog, shuttle and variable-speed playback modes

  • Easy-to-use keyboard layout provides straightforward operations

  • Editing accuracy +/- 1 frame.

FACILITIES:

VTRs and DDRs controlled: All devices that support the standard Sony RS422 9 pin control protocol.
Serial connectors: RJ45 - 8 pin sockets.

PHYSICAL:

Height (max.): 55 mm.
Width: 172mm.
Depth: 146 mm inc. rear connectors.
Weight: 0.56 Kg.

The HT110 GPI (parallel) to RS422 converter module allows the standard transport functions of any VTR to be remotely controlled via simple contact closures.

The tally status from the VTR can be used to illuminate LEDs as required.

With a few external switches it can be used as a quick way of checking VTR control systems, or to integrate a simple customised control system into an existing facility.

 

 

 

FACILITIES:

VTRs and DDRs controlled: All devices that support the standard Sony RS422 9 pin control protocol.

Connectors: 9 and 25 pin D type.

Power: 7 - 9 VDC from remote power supply.

Operating Temp: 0 - 35 Deg C.

PHYSICAL:

Height: 16 mm. Width: 55mm.

Depth: 60 mm inc. rear connectors.

Weight: 50g.

Download Files